Wrightlon® 5200 release film has an excellent elongation which ensures that it will conform to complex curvatures. It is capable of cure temperatures up to 500°F. This film will release from most resin systems and will provide a glossy finish when used directly on the laminate. Color options: available in red, blue and yellow.

Airhold 1 CBS is an all-purpose, high temperature double-backed holding tape. Airhold 1 CBS is designed to hold release plies, release films and breathers in place during lay up and vacuum bagging machining operations. It leaves very little residue which can be removed with common shop solvents.

Resinflow 90 HT is a resin distribution medium for elevated temperatures. Resinflow 90 HT is designed for resin infusion with cures at 350°F. The fused overlay construction provides optimum flow characteristics.

Resinflow 90 HT is a resin distribution medium for elevated temperatures. Resinflow 90 HT is designed for resin infusion with cures at 350°F. The fused overlay construction provides optimum flow characteristics.

Omega Flow Lines have an ''Omega section'' internally to transport resin along the surface and into the part. Made from silicone rubber, the Omega Flow are reusable and sized for use with our polyethylene tubes. Airtech's Omega Flow Lines leave minimal or no mark off on the part when used in conjunction with Airtech's flow media and peel ply.

Silicone tubing for resin feed and vacuum connections. Can be easily cut and connected with range of coupling, elbow and T fittings.

The Airtech high temperature resin infusion connector with a flat base VAC-RIC HT provides inexpensive and efficient through bag connection for vacuum manifold and resin feed lines for high temperature resin infusion applications. It is suitable for use with the Dahlpac MC79-1 vacuum breather pad.