Econostitch® is a heat set and scoured nylon peel ply with red tracers which make this peel ply more visible before and after a cure, reducing the possibility of the peel ply being left on the part.

Econostitch® G is an economical peel ply with good performance when used with both polyester and epoxy resins. It has black tracers with high visibility to reduce the risk of peel ply being left on the part.

Econoply J is a light weight, heat set and scoured polyester peel ply with a tight weave and good drapability. Our Econo range of peel plies are high quality but inexpensive and developed for applications such as resin infusion and hand lay-up. Econo peel plies assist or eliminate the need for sanding or abrading composite laminate.

PP200 is a thin non-woven release ply that has been heat set on one side. The micro porous properties allow the resin to easily pass through the material, making it easy to remove after cure and leaving a course bondable or paintable surface.

Stik-Ply® N80P is a nylon peel ply with tracers and an acrylic adhesive coating. The peel ply can be applied easily to complex surfaces without spray adhesives. The adhesive coating is porous and allows resin to bleed through.

Econolease is a silicone treated nylon peel ply which provides greater release in difficult environments. Our Econo peel plies are designed to work in resin infusion or hand lay-up processes. All coated peel plies have the potential to transfer.