Flowstrip is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven polyester sleeve. Flowstrip is an extremely efficient resin flow channel which is easy to position on infusion laminates and vacuum bag. Resin flow is High Speed ***

Flowstrip PP4 is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven polypropylene sleeve. Flowstrip PP4 is an extremely efficient resin flow channel which is easy to position on infusion laminates and vacuum bag. Flowstrip PP4 have a self releasing polypropylene sleeve and can be removed from cured laminates. Resin flow is Medium Speed **

Flowstrip PP4 Max is a high speed version of the popular Flowstrip PP4 with the addition of a spiral tube to maximise resin flow speed. Flowstrip PP4 Max is still extremely easy to position and vacuum bag over, and can be removed after cure. Flowstrip PP4 max has a self releasing polypropylene sleeve.
Resin flow is Super High Speed ****

Flowrunner PP2 is a flexible resin runner for feeding resin over parts in the resin infusion process. Constructed with a 1/2” spiral resin line and 2" wide PP200 fabric, Flowrunner PP2 can be easily positioned in a vacuum bag pleat. Flowrunner PP2 leaves minimal imprint on panels and can be easily removed from cured laminates. Resin flow is Medium Speed **

Flowrunner KF160 is a sewn tubular Knitflow 160 mesh with 1/2" or 3/4" spiral tube inserted for resin infusion applications. Resin flow is Medium Speed **

Omega Flow Lines have an ''Omega section'' internally to transport resin along the surface and into the part. Made from translucent vinyl rubber (OFV), they are reusable and sized for use with our polyethylene tubes. Airtech's Omega Flow Lines leave minimal or no mark off on the part when used in conjunction with Airtech's flow media and peel ply.